Dust free sandblasting with Sapi Vaccum Devices

 

 

Sapi Vaccum Sandblasting Device

DINO Junior II

Cleaning - Performance

appr. 3 - 8 mē / h

Pressure Recycling Sandblasting Machine DINO-JUNIOR II

The SAPI Pressure Recycling Blasting Machine DINO-JUNIOR II is a compact and versatile vacuum blasting machine. It distinguishes itself by robust construction and mobility. The production surface depends on various characteristics such as kind of surface, compressor capacity, nozzle diameter, kind of blasting medium, etc. The production surface per hour is 3 to 8 mē/h. Above all, this unit provides the user with a clean working environment, low blasting material usage (due to recycling unit) and low waste disposal costs. The DINO-JUNIOR 2 can be applied for example in the steel, shipbuilding, offshore and (petrol)chemical industry and also can be used for maintenance purposes in the civil works sector such as cleaning bridges,  tunnels, buildings, stonemason etc.

 

TECHNICAL DATA:
Hose length: 5 m
Empty weight:  approx. 180 kg
Compressor capacity: > 2 mģ/min
Blasting medium capacity: 25 l or 60 l
Nozzle diameter: 5 mm
Mains connection: 400 V 3 ð 50 Hz
Protection stage:   IP 54
Electrical protection class:    class I
Engine capacity:  5.500 W
Height of vacuum:  3.000 mm
Air connection:  1331/sec.
Power cable: 10 m
Filter area:  9.500 cm
Dust container: 60 l
Vacuum capacity: 50 mm
Length:  1900 mm
Width:  450 mm
Height  1450 mm

Sapi Vaccum Sandblasting Device

DINO Master

Cleaning - Performance

appr. 3 - 8 mē / h

 

http://www.sapigmbh.de/PDF/Ruecksaugstrahlgeraete.pdf

Injection Vaccum Sandblasting Device

Sapi Vaccum Sandblasting Devices
PDF-Brochure

Sapi Vaccum Sandblasting Devices

The SAPI Pressure Recycling Blasting Machine DINO-MASTER   is a compact and versatile vacuum blasting machine. It distinguishes itself through robust construction and movability. With this SAPI sandblasting unit it would blasted by a pressure blasting unit 60 Ltr. Type Mammut and the run out blasting material through the blasting nozzle will be absorbed at once over the recycling blasting head. With a cyclone on the pressure blasting unit the absorbed recycle blasting material will be separated from dust and dirt particles. The re-usable blasting material falls back in the hopper reservoir, dust and dirt particles will be exhaust. The suction unit is designed with a separate switchable twin aggregate with polyester/cotton wool filter. Each of the two suction units receive a dust hopper. All mounted on a solid steel tubular frame with fork lift bags placed on the front side. With 4 roller (thereof 2 guidable) a movable use is guaranteed.  In the basic version the unit will be delivered with a flat brush and a hose package with 10 m. The electric cable apporx. length of 5 m.  The production surface depends on various characteristics such as kind of surface, compressor capacity, nozzle diameter, kind of blasting medium, etc. and the production surface per hour is 3 -10 mē. As blasting material it can be used, corundum, cinder, glass bead, shot blasting or plastic blasting material. Above all this machine provides the user with a clean working environment, low blast material usage (due to recycling unit) and low waste disposal costs. The DINO-MASTER can be applied for example in the steel-, shipbuilding-, offshore and (petrol)chemical industry and also for maintenance purposes in the civil works sector such as cleaning bridges, aqueducts, tunnels, buildings, etc.

TECHNICAL  DATA:

Measures: Length: 230  cm
 Width: 130  cm
 Height: 220  cm

Basic hose length: 10  m
Tare weight: approx. 450  kg
Nozzle diameter: Standard  8 mm
Required compressor capacity: > 5  mģ
Blasting material capacity: 100 l
Power input:  11 kW

Scope of delivery Mobile base frame
2 Suction units
1 Blasting pressure unit Type Mammut 60 l with tank depressuring
10 m hose package with recycling suction head and blasting nozzle
1 Cyclone cleaner with flexible hose connections
1 hose package holder

 

 

Sandblasting Helmetīs New Generation of Sandblasting Helmetīs & Protection Clothīs for the safe Sand-Blasting Job

Pressure Sandblasting Devices Sapi Sandblasting equipoment`s & devices are reliable and world wide in use

Low-Pressure Devices Die "VARIO" Schonstrahl-Düsentechnik setzt neue Leistungsmaßstäbe in der Flächenleistung, Reinigungstechnik.

Injection-Sandblasting Devices

Vacuum-Sandblasting Devices Dust free sandblasting with Sapi Vaccum Devices

Injection Sandblasting Cabinīs Sapi pressure sandblasting cabinīs and cabinetīs available as injection-sandblasting cabinetīs and pressure sandblasting Cabinetīs

Pressure Sandblasting Cabins Pressure Sandblasting Cabins with Sand-Blastig-Recycling-System and high performance in application

Sandblasting Container Sapi Sandblasting Containerīs Rooms Hallīs Chamberīs Houseīs

Sandblasting Hallīs Sapi Sandblasting Hall`s Roomīs Chamberīs Houseīs

Painting Hall`s Chamberīs / Roomīs Modern high-tech Painting Hall`s/ Chamberīs/Roomīs/Cabinets

Mobile Lacquering Container Mobile lacquering container/lacquering room with crane Please ask for a detailed offer regarding the dimensions of the lacquering container and the various types of equipment. Call +49 9083 9615-0 for more information! SAPI mobile lacquering rooms

Accessories / Sandblasting Sanbblasting accessories: Sandblasting Nozzles - Sandblasting Tubes - Protection Clothes - Sandblasting Helemts, Sandblasting Gloves.

Dust Filters-Devices Dust Filters / Devices

Blasting Media Grit Blasting Media Grit

 

 

http://www.youtube.com/watch?v=W7XKy6wippg

 

Diese Seite drucken



Sapi Sandstrahl und Anlagenbau GmbH - Enkinger Weg 4 - 86753 - Möttingen-Germany Tel.: +49 (0) 9083/9615-0 - Fax: +49 (0) 9083/9615-99 - email: info@sapigmbh.de



(C) 2011 - Alle Rechte vorbehalten  |  

Kontakt-Form

  |  

Impressum

  |  

Sitemap

  |